ExpressVu™ 6131-S HDTV System

A 6131-S system consists of:

• Model 6131 HDTV receiver
• Bell TV 51cm elliptical dish
• Two Dual LNBFs
• SW21 switch for Nimiq 1 and Nimiq 2 reception.

Model 6131 High Definition Receiver

Receiver features

• High definition (HD) and standard definition (SD) single-tuner satellite receiver.
• PVR Capability (requires USB-2 hard drive)
• QPSK / 8PSK capable.
• 480p, 720p or 1080i resolutions supported via HD outputs.
• HD connectivity: HDMI 1.1 and HD Component video outputs.
• Both HD and SD content can be viewed on an HDTV using the HD video connections (SD content is up-converted).
• SD connectivity: Composite audio/video and S-video outputs.
• 7-day stored Electronic Program Guide (EPG) (9 days with USB-2 hard drive) features seamless on-screen navigation.
• Parental control locks, program information, themes lists, favorites lists, browse, one-touch channel return, closed-caption support and alternate audio.
• USB and Ethernet connectivity for future applications.
• Slim design (1/4 the size of most receivers).
• Embedded smart card.
  

Remote Control

• Universal IR v. 5.3 Pro 4-component remote control:
  • Controls the satellite receiver in the same room.
  • Can be programmed to operate up to three additional components such as TVs, VCRs and DVD players.

Front Panel Features

• Buttons:
  • Cursor Up, Down, Left, Right and Select for menu/EPG navigation
  • Power, Info, Menu, Sys Info, Cancel
• Satellite/Off-air mode lights
• IR remote sensor/IR blast emitter

Rear Panel Features

• 1 satellite tuner input
• 1 HDMI 1.1 output
• 1 set HD Component (Y Pb Pr) video outputs
• 1 optical digital output for Dolby® Digital and PCM digital audio
• 2 sets of RCA-type audio/video outputs
• 1 S-Video output
• 1 telephone jack
• 1 USB connection
• 1 Ethernet connection
• 3-prong power cord

Specifications

• Size (approx.): 2” H x 16” W x 12.5” D
• Weight (approx): 7 lbs.
• Color: Silver
• Equivalent to VIP211 receiver from Dish Network (can not be used for Dish network)

External USB-2 Hard drive

The official External 750Gb Hard Drive is compatible with the 6131 (with PVR function enabled). It allows you to store up to 750 hours of programming (SD). The box consists of an external LaCie Hard Disk enclosure, a 750Gb hard drive, a USB 2.0 cable, power supply and quick install guide.

You can also use a 3rd party USB-2 external hard drive (EHD) with your 6131, as long as it meets the following requirements:

• 7200 RPM,
• Externally powered via an A/C power outlet,
• USB 2.0, and
• No Sleep Mode (Cannot power down when idle).