|
Pansat 9200HD Mpeg-2 DVB Receiver
The Pansat 9200HD is a high definition receiver, capable of satellite and off-air HDTV reception! It is fully Mpeg2/4 compliant.
Kusat is the oldest Pansat retailer on the Internet!
Fraud Alert: Did you see Pansat receivers advertised for less? If you are not buying from a reputable dealer, you may be buing a "clone" or you may be out of luck if you try to get any service from that "fly-by-night" ebayer or "fly-by-night dealer". A "clone" receiver is a knock-off of the original Panarex receiver. Ku Satellites has been an official Panarex dealer since 1997.
Get a free Diseqc switch when you order online!
Key features:
- Dual tuner capability (optional QPSK/8PSK tuner module required for secondary tuner input)
- Standard Definition/High Definition receiver (MPEG2 and support MPEG4 AVC/H.264).
- HDMI (HDCP) and YPbPr outputs.
- User selectable output resolution (480p, 576p, 720p, 1080i).
- Dolby AC3 audio recption with S/PDIF output (Digital Audio or Dolby AC3 stream out).
- Satellite & Terrestrial Dual Tuner Input.
- SCPC & MCPC reception of C/Ku-Band Satellites
- EPG (Electronic Program Guide) and Multi language OSD
- Fast Channel Change of up to 10,000 Channels (TV & Radio).
- Timer Function (Automatic Turn On/ Off by Setting Function)
- Manual PID/ Satellite & TP/ Network Scan
- Diseqc 1.2 and USALS Compatiable
- Software Upgrade via RS-232C or USB stick
- Universal Remote
- UHF Ready (U-30 Kit Optional)
 the Pansat 9200HD online.
DVB-S2 Kit now available!
A DVB-S2 Kit that enables the Pansat 9200HD To receive DVB-S2 (8PSK) Free-To-Air channel is now available!
Currently identified free-to-air services:
- G26 @ 93°West, C-Band, 10ft (3m) antenna required
- 3820 H 29124 Equity Mux (25 Channels)
- G14 @ 125°West, C-Band, 6ft (2m) antenna required
- 4060 V 30000, NBC Universal (3 Channels)
- 4080 H 30000, CNBC HD+ (1 Channel)
The DVB-S2 kit with Blind Scan capability can be purchased online.
More Features:
- Audio Decoding: ISO/IEC13818-3 (MPEG-2 audio/MUSICAM), Dolby AC-3
- Fully Compliant with DVB-S & DVB-S2 broadcasting
- 950-2150 MHz input Frequency (IF Loop Throughout)
- Multi Satellite Scan
- Variable Input Symbol Rate (1-45 Msps)
- RTC (Real Time Clock)
- PIG (Picture In Graphic)
- 5 Favorite List & Unlimited Programs per each
- Powerful Channel Editing Fuction
- Sorting: Alphabetic, Satellite, FTA/Scramble, Parental Lock
- Move, Delete, Favorite Edit
- Parental Lock, Channel Rename, Channel Skip
Note: You may also use a DiseqC motor and USALS with this receiver. Please note that the installation of a DiseqC motor is not recommended if you are not able to install the system yourself.
Technical Specifications
| Front-End |
| Primary IF input |
950MHz to 2150MHz with loopthrough |
| Secondary IF Input |
Optional QPSK/8PSK, 950MHz to 2150MHz, tuner required. |
| RF Input Frequency (ATSC) |
54-860 MHz |
| Input Level |
-65 dBm ~ -25 dBm |
| LNB Power |
13 /18VDC / 500mA Max |
| DiSEqC Control |
1.0, 1.2 & USALS compatible |
| Band Switching |
22KHz Tone(22 +/- 4KHz,Amplitude :0.6 +/- 0.2V) |
| Modulation method |
DVB-S (Satellite): QPSK, 8PSK (Option), LDPC/BCH (DVB-S2) |
| Symbol Rates |
LDPC/BCH(DVB-S2) 8PSK/QPSK: 10~30Msps (Option)
DVB-S QPSK: 1~45Msps |
| Viterbi Decoding Rate |
1/2,2/3,3/4,5/6 and 7/8 |
| Maximum Bandwitdth |
36MHz |
| LDPC/BCH |
Punctured Code, 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 in DVB-S2 |
| MPEG transport Stream A/V Decoding |
| Demultiplex |
According to ISO/IEC 13818-1 (MPEG-2) |
| Input Stream |
Maximum 90Mbit/s |
| Aspect Ratio |
4:3(default), 16:9 letterbox |
| Video Deocding |
ISO/IEC13818-2 (MPEG2 video) MP@HL, ISO/IEC 14496-10 HP@L4 |
| Video Resolution |
480p, 576p, 720p or 1080i |
| Audio Decoding |
ISO/IEC13818-3 (MPEG2 audio/MUSICAM), Dolby AC-3 |
| Audio Mode |
Single Channel/Dual Channel, Stereo, Joint Stereo |
| Video Ouput |
HDMI with HDCP, RCA |
| A/V outputs |
| Digital output |
HDMI with HDCP |
| Video + Audio RCA outputs |
Video, Audio L, Audio R, YPbPr |
| Digital Audio |
1 optical output, S/PDIF |
| VHF Modulator Output |
NTSC, CH 3 (61.25MHz), CH 4 (67.25 MHz) |
| Remote Control |
| Type |
Universal 2 Remote |
| Battery |
2x 1.5V AAA Type |
|
| Microprocessor & Memory |
| Main Processor |
ARM926 |
| CPU Clock |
280MIPS |
| Flash Memory |
8 Mbyte |
| SDRAM |
128 Mbyte |
| EEPROM |
32 Kbit |
| Data port |
| Connector |
9 Pin D-Sub Type |
| Protocol |
RS232 Asynchronous |
| Data Rate |
Maximum 19.2Kbps, 115.2K |
| Front Panel |
| 4 Digits LED |
Channel Number Display |
| 8 keys |
Power, Channel Down/Up, Volume up/down, Menu, Exit, OK |
| USB |
USB 2.0 Host |
| Rear Panel |
| IF Input & Loopthrough output |
F-type, IEC 169-24 |
| RCA outputs |
Video (1), Audio L (1), Audio R (1), YPbPr (3) |
| VHF Modulator Output |
F-type, IEC 169-24 |
| S/PDIF |
Optical |
| HDMI |
Type A |
| RS232 Serial Port |
9 Pin D-Sub Type |
| Off-air Signal Input |
ATSC RF signal Input, F-type, IEC 169-24 |
| Electrical and Mechanical |
| Input Voltage & Power Consumption |
AC 90-250V, 50/60Hz , Max. 40Watts |
| Size (WxDxH) |
340 x 245 x 65mm |
| Size(WxDxH) |
2.5kg |
|
Warranty
This unit comes with a 2 year warranty from Panarex.
Notes:
- All our receivers are shipped with the latest firmware version. It is not necessay to update any software in your receiver unless it is at least 1 or 2 years old (depending on the model).
- Free-to-air offers hundreds of channels from all around the World that do not require a monthly subscription. See our Mpeg-2 section for more details. You agree, by purchasing a Free-to-air receiver, that you will not modify your receiver it in any way, shape or form, in an attempt to receive subscription programming for which you have not paid the required subscription fees.
- Attempting to download software or attempts to modify this receiver in any way, shape or form will void the warranty and cancel any possibility of return.
- Downloading official Panarex software into the receiver resulting in a receiver failure (due to an improper download or a bad cable) will also void your warranty and cancel any possibility of return.
- If you need to update the software of your receiver, please contact us to return your product for service.
- For general warranty and return proceduress, please read our "how to order" page from top to bottom (by ordering this item, you have read and agree to all our terms and conditions for returns).
User Interface
The following screenshot (available soon) give a glimpse of the Pansat 9200HD user interface.
|
