|
Pansat 250SM Mpeg-2 DVB Receiver
The Pansat 250SM is a Conexant based free-to-air satellite receiver. This is the latest receiver from Pansat and comes with an amazing set of features!
Kusat is the oldest Pansat retailer on the Internet.
Fraud Alert: Did you see Pansat receivers advertised for less? If you are not buying from a reputable dealer, you may be buing a "clone" or you may be out of luck if you try to get any service from that "fly-by-night" ebayer or "fly-by-night dealer". A "clone" receiver is a knock-off of the original Panarex receiver. Ku Satellites has been an official Panarex dealer since 1997.
Get a free Diseqc switch when you order online...
 the Pansat 250SM online.
Key features:
Some of the key features of the Pansat 250SM:
- Integrated USB2.0 Host
- PVR Capability (external USB-2 hard drive required)
- Component Out (YPbPr)
- S/PDIF (Digital Audio or Dolby AC3 Stream out)
- Smart (Blind) Search and Satellite Scan
- 5,000 Channels (TV & Radio) and fast channel change
- Fully MPEG-2 DVB compliant
- 10 days EPG (Electronic Program Guide)
- Diseqc 1.2 & USALS Compatible
- Automatic PAL/NTSC Conversion
Additional features:
More features of the Pansat 250SM:
- Multi language OSD
- 256 Colors (Graphic User Interface) Number
- PIG (Picture In Graphic)
- 5 Favorite Lists with 100 Programs each
- Powerful Channel Editing Fuction
-
- Sorting: Alphabetic, Satellite, TP Order, FTA/Scramble, Parental Lock
- Move, Delete, Favorite Edit
- Parental Lock, Channel Rename, Channel Skip
- RTC (Real Time Clock)
- Timer Function (Automatic Turn On/ Off by Setting Function)
- 950-2150 MHz input frequency (with IF Loop Throughout)
- Variable Input Symbol Rate (1-45 Msps)
- Flexible receiption of SCPC & MCPC from C/Ku-Band Satellites
- Manual PID/ Satellite & TP/ Network Scan
- Software Upgradable via USB memory stick (128Mb X1 included)
- Software Upgradable via RS232 Null Modem Cable (Receiver to Receiver or PC to Receiver)
- Conditional Access - Conax CAS Embedded
- UHF Ready (U-30 Kit Optional)
- S-VHS Out
- Universal 2 Remote Control
Note: You may also use a DiseqC motor and USALS with this receiver. Please note that the installation of a DiseqC motor is not recommended if you are not able to install the system yourself.
PVR Function Keys
|
Mode
|
Function
|
Description
|
Remote Control Button
|
|
PVR
|
Record
|
Start
|
12 Record Button
|
|
Stop
|
11 Stop Button
|
|
Time Shift
|
Start
|
8 Pause Button
|
|
Stop
|
Press 8 again
|
|
Recorded File Play
|
Display
|
12 HDD Button
|
|
Select
|
2 Page Up Button
6 Page Down Button
|
|
Play
|
7 Play Button
|
|
Stop
|
11 Stop Button
|
|
Trick Mode 12X
|
15 Time Shift Play Button
|
|
Trick Mode 64X
|
Press 15 twice
|
|
MP3
|
MP3 File
Play
|
Display
|
12 HDD Button
|
|
Select
|
2 Page Up Button
6 Page Down Button
|
|
Play
|
7 Play Button
|
|
Stop
|
11 Stop Button
|
|
JPEG
|
Image
|
Display
|
12 HDD Button
|
|
Select
|
2 Page Up Button
6 Page Down Button
|
|
Next
|
10 Page Up Button
|
|
Before
|
4 Page Down Button
|
|
Enlargement
|
2 Channel Up Button
|
|
Reduction
|
6 Channel Down Button
|
|
Turn to + 90°
|
5 Volume Up Button
|
|
Turn to - 90°
|
6 Volume Down Button
|
|
Stop
|
Exit Button
|
|
HDD
|
Format
|
Format
|
1. 12 HDD Button
2. ‘Exit’ Button
3. ‘Mode’ Button
|
Recoding Time Display : Toggled by Time Key(BLUE KEY)
Technical Specifications
| Front-End |
| IF Input Frequency (Satellite) & Loopthrough |
950MHz to 2150MHz |
| Input Level |
-65 dBm~-25 dBm |
| LNB Power |
13 /18VDC / 500mA Max |
| DiSEqC Control |
Diseqc 1.2 & USALS Compatible |
| Band Switching |
22KHz Tone |
| Modulation method |
QPSK |
| Symbol Rates |
1~45 Msps (SCPC, MCPC) |
| Viterbi Decoding Rate |
1/2,2/3,3/4,5/6 and 7/8 |
| Reed Solomon Decoding |
FEC: 204, 188. t=8 |
| MPEG transport Stream A/V Decoding |
| Demultiplex |
According to ISO/IEC 13818-1 |
| Input Stream |
Max. 90Mbit/s |
| Aspect Ratio |
4:3, 16:9 |
| Video Deocding |
720x576 (PAL), 720X480 (NTSC) |
| Audio Decoding |
MPEG Layer l & ll |
| Audio Mode |
Single Channel /Dual Channel, Stereo, Joint Stereo |
| Audio Sampling Frequency |
16/22, 05/24/32/41, 1/48 khz |
| A/V outputs |
| RCA outputs |
Video, Audio L, Audio R, YPbPr |
| Digital Audio |
1 optical output, S/PDIF |
| VHF Modulator Output |
NTSC, CH 3 (61.25MHz), CH 4 (67.25 MHz) |
| Remote Control |
| Type |
IR Remote |
| Battery |
2 x 1.5V AAA Type |
|
| Microprocessor & Memory |
| Main Processor |
VIRGO SE |
| CPU Clock |
150 MHz |
| Flash Memory |
8 Mbyte |
| SDRAM |
32 Mbyte |
| EEPROM |
256 Kbit |
| Data port |
| Connector |
9 Pin D-Sub Type |
| Protocol |
RS232 Asynchronous |
| Data Rate |
Max. 19.2Kbps |
| Front Panel |
| 4 Digits LED |
Channel Number Display |
| 8 keys |
Volume Up/Down, Channel Down/Up, OK, Power, Menu, Exit |
| USB |
1 Host, Max 500mA |
| Smart Card Interface |
1 Slot |
| Rear Panel |
| IF Input & Loopthrough output |
F-type, IEC 169-24 |
| RCA outputs |
Video (1), Audio L (1), Audio R (1), YPbPr (3) |
| VHF Modulator Output |
F-type, IEC 169-24 |
| S/PDIF |
Optical |
| RS232 Serial Port |
9 Pin D-Sub Type |
| Electrical and Mechanical |
| Input Voltage & Power Consumption |
AC 90-250V, 50/60Hz , Max. 22Watts |
| Standby Power |
Less than 10 Watts |
| Size (WxDxH) |
290 x 200 x 55 mm |
| Size(WxDxH) |
2.1kg |
|
Warranty
This unit comes with a 2 year warranty from Panarex.
Notes:
- All our receivers are shipped with the latest firmware version. It is not necessay to update any software in your receiver unless it is at least 1 or 2 years old (depending on the model).
- Free-to-air offers hundreds of channels from all around the World that do not require a monthly subscription. See our Mpeg-2 section for more details. You agree, by purchasing a Free-to-air receiver, that you will not modify your receiver it in any way, shape or form, in an attempt to receive subscription programming for which you have not paid the required subscription fees.
- Attempting to download software or attempts to modify this receiver in any way, shape or form will void the warranty and cancel any possibility of return.
- Downloading official Panarex software into the receiver resulting in a receiver failure (due to an improper download or a bad cable) will also void your warranty and cancel any possibility of return.
- If you need to update the software of your receiver, please contact us to return your product for service.
- For general warranty and return proceduress, please read our "how to order" page from top to bottom (by ordering this item, you have read and agree to all our terms and conditions for returns).
User Interface
The following screenshot (available soon) give a glimpse of the Pansat 250SM user interface.
|
