|
ExpressVu 6141-S HDTV System
A 6141-S system is: a model 6141 HDTV receiver with a 51cm elliptical dish & 2 x LNBFs w/ SW21 switch for Nimiq 1 (91W) and Nimiq 2 (82W) reception.
|
To get a Bell TV 6141-S system as a new customer, please visit our prices & promotions page.
To order a 6141 as an EXISTING customer, go to our online catalog and get a .
|
Note: For top of the line DVI, HDMI and Optical Cables, please visit our Home Theatre cable section.
Model 6141 High Definition Receiver
Receiver features
- High definition (HD) and standard definition (SD) single-tuner satellite receiver.
- Integrated off-air tuner for reception of local digital/HD and analog broadcasts.
- Satellite Mpeg-2 / QPSK and Mpeg-4 / 8PSK capable.
- 480p, 720p or 1080i resolutions supported via HD outputs.
- HD connectivity: HDMI and HD Component video outputs.
- Both HD and SD content can be viewed on an HDTV using the HD video connections (SD content is up-converted).
- SD connectivity: Composite audio/video and S-video outputs.
- Both HD and SD content can be viewed on a SDTV using the SD video connections (HD content is down-converted).
- HD and SD outputs active simultaneously.
- 7-day stored Electronic Program Guide (EPG) features seamless on-screen navigation between off-air digital/analog programming.
- Parental control locks, program information, themes lists, favorites lists, browse, one-touch channel return, closed-caption support and alternate audio.
- USB and Ethernet connectivity for future applications.
- Slim design (1/4 the size of most receivers).
- Embedded smart card.
Remote Control
- Universal IR v. 5.3 Pro 4-component remote control:
- Controls the satellite receiver in the same room.
- Can be programmed to operate up to three additional components such as TVs, VCRs and DVD players.
Front Panel Features
- Buttons:
- Cursor Up, Down, Left, Right and Select for menu/EPG navigation
- Power, Info, Menu, Sys Info, Cancel
- Satellite/Off-air mode lights
- IR remote sensor/IR blast emitter
Rear Panel Features
- 1 satellite tuner input
- 1 HDMI output
- 1 set HD Component (Y Pb Pr) video outputs
- 1 optical digital output for Dolby® Digital and PCM digital audio
- 2 sets of RCA-type audio/video outputs
- 1 S-Video output
- 1 ATSC antenna input for off-air analog/digital broadcasts
- 1 UHF Pro remote antenna input
- 1 telephone jack
- 1 USB connection
- 1 Ethernet connection
- 3-prong power cord

Specifications
- Size (approx.): 2” H x 16” W x 12.5” D
- Weight (approx): 7 lbs.
- Color: Silver
- Equivalent to VIP211 receiver from Dish Network (can not be used for Dish network)
|