Click to enlarge

This is a very cost effective, high-isolation 22KHz switch.

You can use a 22KHz switch on most satellite receivers (except Bell TV/Dish Network receivers) to switch between 2 satellites.

This switch can be used with Shaw Direct, DirecTV and almost all Free-to-air satellite receivers.

If you are having difficulty using a DiSEqC switch with your setup (due to excessive cable length or any other factor that interferes with DiSEqC operation), a 22KHz switch may be a better solution if you are only receiving 2 satellites.

Note: It is NOT recommended to combine a DiSEqC switch with a 22KHz switch.