Click to enlarge

A 4-way multiswitch is used to increase the number of outputs coming from a Dual output LNBF to 4 outputs.

This switch features 2 LNBF inputs (13V/18V), one Cable or Off-air antenna input (non-amplified) and 4 outputs. If a Cable or Off-air signal is inserted, a Diplexer will be necessary to extract it to a TV or cable tuner.

This Eagle-Aspen switch consists of a high quality, low profile die-cast case and high reliability diode steered switching.

The switch comes with a power supply to provide 13V and 18V to the LNBF. The power supply connects to the multiswitch through a coaxial line (RG6 or RG59). If the switch is used outdoor, the power supply must remain indoors and an independent coaxial line must be used to feed the switch (up to 100ft).

Using a power supply is not essential if your satellite receivers are less than 100ft away from the switch, but it will remove load on the receivers and improve overall signal distribution.

Note: You can not use this switch if you only have one (1) line coming from your satellite dish. You should not use this switch to mix the signal from 2 different satellite dishes - for such an application, you may want to use a DiSEqC or a 22KHz switch instead.