Click to enlarge

If you are building a mini-cable system, PicoMacom's MPC series of mini modulators is a professional and cost effective solution that will ensure years of outstanding performance.

The Pico Macom MPCM45 is a professional grade high-performance CATV mini-modulator. This modulator accepts any audio-video baseband television signal and provides a 45dBmV minimum output on CATV channels 2 to 125 (54-806 MHz) while accommodating HRC and IRC offset frequencies.

The unit can be reconfigured to any output channel within band by qualified service centers. Up to 12 or 16 units can be installed “mix-andmatch” in Pico Macom’s MPC12, MPS12, MPC12R or MPC16 chassis with MPCMA agile mini-modulators or MPCD mini-demodulators.

Its universal design enables it to be installed in other manufacturers’ mini-mod chassis. The unit’s phase-locked loop (PLL) circuitry and unique multi-stage output bandpass filtering ensure accurate and spuriousfree output. In addition, the MPCM45 uses SAW filtering with FCC group delay correction circuitry to provide superior adjacent channel selectivity.

The MPCM45 modulator is shipped with all internal adjustments preset. Pico Macom backs up this product with its industry leading 5-year limited warranty.

RF Specifications:

• Channels: 125 Channels (CATV 2-59)
• Frequency Range: 54-806MHz
• Output Level: 35 to 45 dBmV adjustable from front panel
• Output Impedance: 75 Ohms
• Audio/Video Ratio: Adjustable -10 to -25 dB below video carrier
• Frequency Stability: ±5 kHz in aeronautical band Conforms to FCC Docket 21006
• Spurious Output: -60 dB below video carrier with A/V ratio @ -15 dB
• Carrier-to-noise ratio (in-band): >60 dB
• Carrier-to-noise ratio (out-of-band): >60 dB
• Fv-1.5 MHz: >55 dBc
• Fv-6.0 MHz: >60 dBc

Video Specifications:

• Input Level: 1 V p-p min for 87.5% mod.
• Input Impedance: 75 Ohms
• Input Level Range: 0.5 V to 1.5 V p-p
• Differential Gain: <5% (10 to 90% APL)
• Differential Phase: <5° (10 to 90% APL)
• Chrominance Luminance delay: Meets FCC group delay predistortion correction for
  color transmission.

Audio Specifications:

• Audio Input Impedance: 5k Ohms
• Baseband Input Level: 0.5 V p-p for 25 kHz peak dev.
• Preemphasis: 75 microseconds
• Flatness: 1.5 dB max. 50 Hz to 15 kHz

General Specifications:

• Power Input: +12 VDC, +5 VDC
• Operating Temperature: -10° C to +50° C
• Dimensions: 1˝(W) x 71/2˝(D) x 31/2˝(H)
• Weight: 0.7 lbs.
• Connectors: RF: “F” type
• Power: 0.100˝ center 3-pin