Click to enlarge

When used in conjunction with Microyal Dish Pro LNBFs, the Dish Pro DP34A switch provides the distribution of 2 satellites (Bell 82°W & 91°W) or 3 satellites (Dish Network 110°W, 119°W, 121°W) to up to 4 satellite receivers.

The DP34A switch comes with a power supply to feed both or all three LNBFs, which reduces stress on the satellite receivers.

The DP34 has an additional 3 outputs to feed another DP-34A switch.

This switch meets Dish Network and Bell requirements. This switch should only be used on receivers manufactured after 2005 that carry the DishPro "DP" logo (model 4100 and above).

Specifications:

• Frequency Range: 950-2150MHz
• Insertion Loss:
  • IN-OUT (to other DP34A switch): 0dB
  • IN-RX (to satellite receivers): 0dB
• Isolation:
  • LNB-LNB: 40dB
  • OUT-OUT: 45dB
  • RX-RX: 45dB
• Return Loss: 10dB
• Cross Polar Isolation: 30dB

IMPORTANT: When used with 2 x DishPro LNBFs for Bell Bell TV reception, use Input 1 and Input 3 of the DP34 switch. Do not use Input 2. This input should only be used if you are working with a DishPro Twin LNBF (with integrated 91/82 or 119/110 reception). Do NOT put a terminator on Input 2 otherwise switch will overheat. Run a Check Switch test (Menu 6-1-1) and your DishPro compatible Bell Bell TV receivers should recognize the switch (DP34) and both the 91 (Input 1) and 82 (Input 3) satellite.