Dual Satellite Dish (51cm/20")

If you have a 51cm/20inch dish with dual-satellite capability.

• Your dish has a plastic Y shaped bracket at the end of the arm.
• The Y bracket holds 1 x LNBF and is capable of holding a second LNBF.
• The skew on the back of your dish may already be set, otherwise, you will have to re-align your dish after setting the skew properly.
• If the skew is not set or is set incorrectly, your reception of 82°W will either be very poor or non-existant!

In order to upgrade to dual satellite reception, you will need

• Dual LNBF to fill the empty slot in your Y bracket.
• An SW21 switch to combine both satellites to only one receiver or
• An SW44 switch to combine the signal to multiple receivers.
• These items are available in kits:
  • Dual LNBF + SW21 or
  • Dual LNBF + SW44

For more information on distributing Bell TV to multiple receivers, go to our installation section.

Single Satellite Dish (45cm/18")

If you have a 45cm/18inch dish with single satellite capability, you will need our Elliptical dish upgrade kit and an SW21 or an SW44 switch based on how many receivers require 91°W and 82° reception.

For more information on distributing Bell TV™ to multiple receivers, go to our installation section.

Cottage dish kit

If you currently own a Bell TV satellite system, a cottage dish kit will allow you to keep watching satellite television at the cottage or any second location.

You may want to consider a self installation kit when purchasing a second dish kit.

this 45cm/18inch dish kit online.