Kusat header B

Promax PkUpdate Tutorial

Promax PkUpdate Tutorial at Kusat (a)

  • Start by launching PKUpdate.
  • Make sure your Promax Prodig 5 TV Explorer is connected to the COM1 port of your computer using a NULL MODEM cable and that the COM1 port on your computer is set to 115200 bauds in Start > Control Panels > System > Hardware Manager > COM Ports > COM1.
  • Make sure you the Power Management feature of your Promax Prodig 5 TV Explorer to OFF by holding the Config key on your instrument (8) for a few seconds and selecting OFF under Power Management.

Promax PkUpdate Tutorial at Kusat (b)

  • Select the new Firmware file (UpdPG5.pro for the international version or USUpdPG5.pro for the US version).

Promax PkUpdate Tutorial at Kusat (c)

  • Once the software update starts, you will see a progress status.
  • The entire firmware update process takes approx. 10mn.

Promax PkUpdate Tutorial at Kusat (d)

  • Once the update process is complete, the Promax Prodig 5 TV Explorer will reboot on its own.